Advantage Machining
  Division of Research Automation
  601 West New York Street
  Aurora, Illinois  60506-3876
  USA
  Phone: 630-897-7344
  Fax: 630-897-7336

Some of our Equipment

	Clausing TLA43 CNC Lathe Turning Diameter - 43 in. Spindle Bore - 4.00 in. Between Centers - 240 in. Max Ring and Sleeve Dia. with Pie Jaws - 44 in.
	Bullard Cut Master 64" VTL Manual Lathe Turning Diameter - 64 in. Between Centers - 48 in.
	Mazak Nexus 350 - 2043 - CNC Lathe: Turning Diameter - 17.5 in. Spindle Bore - 4.06 in. Between Centers - 49 in. Max Ring and Sleeve Dia. with Pie Jaws - 26 in.
	Okuma Howa 2033 CNC Mill 50 Taper Travel X - 51.400 in. Travel Y - 27.250 in. Travel Z - 31.500 in.
	OKK Horizontal CNC Mill 50 Taper Travel X - 59.094 in. Travel Y - 31.535 in. Travel Z - 31.535 in. Travel B - 360° in 1° increments 4th Axis - Yes
	Fadal VMC 2040 CNC Mill 40 Taper Travel X - 40 in. Travel Y - 20 in. Travel Z - 28 in. Through the Spindle Coolant - Yes 4th Axis - Yes

Other equipment not shown includes the following:

• Mazak Quick Turn 300 CNC Lathe
  • Turning Diameter - 12 in.
  • Spindle Bore - 2.87 in.
  • Between Centers - 38 in.
  • Max Ring and Sleeve Dia. with Pie Jaws - 14 in.
• Mazak Quick Turn 300 CNC Lathe
  • Turning Diameter - 16.5 in.
  • Spindle Bore - 2.87 in.
  • Between Centers - 45 in.
  • Max Ring and Sleeve Dia. with Pie Jaws - 24 in.
• Danchi Manual Lathe:
  • Turning Diameter - 35 in.
  • Spindle Bore - 3.5 in.
  • Between Centers - 70 in.
• Nardini Manual Lathe:
  • Turning Diameter - 30 in.
  • Spindle Bore - 4.0 in.
  • Between Centers - 80 in.
• Clausing Colchester Manual Lathe:
  • Turning Diameter - 17 in.
  • Spindle Bore - 3.0 in.
  • Between Centers - 80 in.
• Wasino Manual Lathe
  • Turning Diameter - 14 in.
  • Between Centers - 30 in.
• Fadal CNC Mill 40 Taper
  • Travel X - 40 in.
  • Travel Y - 20 in.
  • Travel Z - 24 in.
  • 4th Axis - Yes
• Fadal CNC Mill 40 Taper
  • Travel X - 40 in.
  • Travel Y - 20 in.
  • Travel Z - 28 in.
  • 4th Axis - Yes
• Manual Mills
  • Seven (7) Bridgeports on line - W.D.R.O.
  • One Wells Index
• Grinding
  • Gallmeyer & Livingston 45A
  • Harig 6-12 Surface
  • Mitsui 6-18 with wet attachment (2 machines)
• Sawing
  • DoAll Automatic C-80
  • DoAll C-4 Horizontal Band Saw
  • Grobe Vertical Band Saw

Support Equipment

Upon request we will provide a full listing of our welding, shearing and fabrication equipment